Donnerstag, 25. August 2022

25/52 neuer Eisenbahnwagon SSYs mit Flak 88 mm // German Flak railway waggon

SSYs der Reichsbahn mit Flak 88 mm

Auf einer französischen Seite fand ich die Vorlage für das neue Modell. Einen 50 ton Schwerlastwaggon der Reichsbahn, auf dem eine 88 mm Flak montiert war. Wahrscheinlich handelt es sich um eine Improvisiation, da es nur wenige Fotos gibt, und spätere Modelle der Bedienmannschaft mehr Platz zum Bedienen des Geschützes boten. Bei dieser Version muss es extrem eng gewesen sein, es gab offensichtlich keine seitlichen Plattformen, die mehr Platz beim Schiessen geboten hätten. Auf der französischen Steite wird der Nachbau mit der Kreuzlafette der Flak gezeigt. Grundsätzlich ist dies nicht ausgeschlossen, es gibt Fotos von einer 88 mm Flak mit der Kreuzlafette, doch warum noch zusätzlich die Kreuzlafette verwenden, diese hätte nur im Weg gestanden. Daher habe ich mich dazu entschlossen diese wegzulassen. Es könnte natürlich auch sein, dass diese mit Holzbohlen überbaut worden war. Wenn jemand mehr hierzu weiss, ich bin offen für andere Ideen. Das Modell kommt wie fast immer mit beweglichen Teilen, wobei die Flak dieses Mal nur drehbar sein wird. Leider muss ich bis zum Druck noch etwas warten, für eine Bestellung habe ich noch nicht genügen neue Modelle zusammen.

Hier die Seite mit den beiden Originalfotos und dem Nachbau:

https://www.materielsterrestres39-45.fr/fr/index.php/materiels-ferroviaires/61-allemagne-materiel-ferroviaire/1465-8-8-cm-flak-36-37-sur-plate-forme-ferroviaire-typ-ssy


Im Original gab es wohl einen Kasten für die Munition, ich habe mal 2 Varianten gezeichnet,
In the original there was certainly a box for the ammunition, I once drew 2 variants,


Draufsicht,
top view


die Flak ist um 360 Grad drehbar,
the flak can be rotated 360 degrees



SSYs of the Reichsbahn with Flak 88 mm

On a French site I found the pattern for the new model. A 50 ton heavy duty wagon of the Reichsbahn, on which a 88 mm Flak was mounted. Probably it is an improvisation, because there are only few photos, and later models offered more space for the crew to operate the gun. On this version it must have been extremely cramped, there were obviously no side platforms that would have provided more space when firing. On the French site the replica is shown with the cross mount of the flak. In principle this is not impossible, there are photos of an 88 mm flak with the cross mount, but why use the cross mount in addition, it would only have stood in the way. Therefore I decided to omit it. Of course, it could also be that it was built over with wooden planks. If anyone knows more about this, I am open to other ideas. The model comes as almost always with moving parts, but this time the flak will only be rotatable. Unfortunately I have to wait a bit until printing, for an order I don't have enough new models together yet.

Here the page with the two original photos and the replica:







14/52 Obice da 305/17 WWI gun

Obice da 305/17, Mörser aus dem 1. Weltkrieg in 1/144 Ich weiss auch nicht so recht, wie es gekommen ist, ich sollte andere Modelle zeichnen...