Posts mit dem Label ship werden angezeigt. Alle Posts anzeigen
Posts mit dem Label ship werden angezeigt. Alle Posts anzeigen

Dienstag, 18. November 2025

37/52 russiches Fluss Kanonenboot Projekt 1125

 Projekt 1125, russisches Fluss-Kanonenboot

Das Modell gab es vor vielen Jahren schon einmal als Resin-Bausatz aus Russland. Die Gussqualität war so halbwegs akzeptabel und man musste viel nacharbeiten. Von Fairy Kikaku aus Japan gab es ein Schiff der Projektreihe 1124 als Modell.  Auch dies war ein Resinmodell, und wenn ich es richtig in Erinnerung habe, war hier sogar der Rumpf geteilt. Mein Modell zeigt ein Schiff der Reihe 1125 mit der anfänglichen Bewaffnung. Diese änderte sich im Laufe des Krieges immer wieder und zum Schluss kamen sogar Türme des T-34 und M-8 Raketenwerfer dazu.  Neben dem Projekt 1125, gab es bei der russischen Marine auch ein Projekt 1124. Die beiden Schiffe waren sich sehr ähnlich, jedoch war bei der 1124 Version das Heck leicht abgesetzt. Auch hier änderte die Bewaffnung im Laufe des Krieges.

Ich habe jetzt das Projekt 1125 mal so gezeichnet, mit der Bewaffnung wie am Anfang, also mit den Panzertürmen. Eventuell werde ich aber auch noch den T-34 Turm und den Raketenwerfer ergänzen.


Project 1125, Russian river armored boat

Many years ago, this model was available as a resin kit from Russia. The casting quality was reasonably acceptable, but it required a lot of reworking. Fairy Kikaku from Japan produced a model of a ship from the Project 1124 series.  This was also a resin model, and if I remember correctly, even the hull was split. My model shows a ship from the 1125 series with its initial armament. This changed repeatedly during the war, and in the end, T-34 turrets and M-8 rocket launchers were even added.  In addition to Project 1125, the Russian Navy also had Project 1124. The two ships were very similar, but the stern of the 1124 version was slightly offset. Here, too, the armament changed during the course of the war.

I have now drawn Project 1125 with the armament as it was at the beginning, i.e., with the tank turrets. However, I may also add the T-34 turret and the rocket launcher.


Quellen / sources:

https://www.navypedia.org/ships/russia/ru_cf_1125.htm

https://wio.ru/fleet/ww2armorb.htm

https://avtovsamare.ru/en/rechnoi-kater-proekta-1125-rechnye-tanki-stalingrada-modernizacii-v-hode/

https://www.o5m6.de/redarmy/bronekater.php

https://sketchfab.com/models/95def195f1f34127b363a1671b7b63a3/embed

https://warthunder.com/en/news/4191-development-project-1124-armored-river-boat-waterborne-katyusha-en


1/144 Bronekater ship



1/144 Bronekater



1/144 Bronekater


Bitte einmal volltanken,
please fill up the tank




Project 1125 with rocket launcher and T-34 turret,
Projekt 1125 mit Raketenwerfer und T-34 Turm


Das Modell von ACR,
the old kit from ACR






Donnerstag, 5. Juni 2025

12/52 russische Landungsboote DB pr.165 - Landing Boat

 

Russische Landungsboote in 1/144

Die beiden Modelle habe ich endlich mal fertig angemalt. Allerdings werden sie auf kein Diorama kommen. Die Grundform ist für beide das xxx.  Die erste Variante war als Transport und Landungsboot gedacht. Dazu wurde einfach eine Holzplattform aufgebaut und so der Transport von leichten Fahrzeugen ermöglicht. Die zweite Variante war als Begleitung solcher Transporte gedacht und diente der Luftsicherung gegen deutsche Tiefflieger.

 

Russian landing crafts in 1/144

I have finally finished painting these two models. However, they will not be on any diorama. The basic shape for both is the xxx.  The first variant was intended as a transport and landing craft. For this purpose, a wooden platform was simply built to enable the transportation of light vehicles. The second variant was intended to accompany such transports and was used for air defense against German low-flying aircraft.

1/144 Russian landing ship 
DB pr.165 - Landing Boat



1/144 Russian landing ship 
DB pr.165 - Landing Boat


1/144 Russian landing ship 
DB pr.165 - Landing Boat




Dienstag, 24. Dezember 2024

30/52 Weihnachtssondermodell russiche Fähre mit 100 mm Schiffsgeschütz

Landing Craft DB pr.165 with 100mm B-24BM Naval Gun "Floating Battery"

Heute stelle ich mein Jahresend-Spezial Modell vor.

Das Modell gab es vor vielen Jahren mal von einer kleinen russischen Firma, AER SLR oder so ähnlich.Die Idee hatte ich schon lange. Sehr schöne Illustrationen des Modells findet man auf der Seite https://www.o5m6.de/redarmy/floatingbattery.php

Wie so oft im Leben, wenn man weiss, nach was man suchen muss, dann finden sich plötzlich ganz viele Informationen. So hatte ich, als ich fast fertig war, sogar eine gute Zeichnung gefunden.

Das 100 mm Schiffsgeschütz wurde auf zwei als Fähre gekoppelte Pontons installiert. Es soll mehrere Fähren gegeben haben, die immer wieder zum Einsatz kamen.

Zum Druck wird es leider dieses Jahr nicht mehr reichen, aber so habe ich noch Zeit und werde wohl auch ein paar kleinere Fehler beheben und weitere Details ergänzen.

Hier die Liste von Informationsquellen:

https://forums.airbase.ru/2010/05/t63282--desantnyj-motobot-pr-165-tipa-db.html

https://alternathistory.ru/107426-2/

https://www.drive2.ru/c/479489600243368515/

https://voentex.ru/blog/56

http://war-russia.info/index.php/nomenklatura-vooruzhenij/361-vmf/nadvodnye-korabli/desantnye-korabli-i-katera/1870-desantnye-katera-pr-pr-1176-akula-ondatra-1971g-4

https://dzen.ru/a/Y49ef8OVOURrs5k9


Landing Craft DB pr.165 with 100mm B-24BM Naval Gun "Floating Battery"


Today I am presenting my year-end special model.

The model was made many years ago by a small Russian company, AER SLR or something similar.

I had the idea for a long time, very nice illustrations of the model can be found on the page www.o5m6.de. --https://www.o5m6.de/redarmy/floatingbattery.php

As so often in life, if you know what to look for, you suddenly find a lot of information. So when I was almost finished, I even found a good drawing.

The 100 mm naval gun was installed on two pontoons coupled as a ferry. There are said to have been several ferries that were used again and again.

Unfortunately there won't be enough time to print it this year, but I still have time and will probably correct a few minor errors and add more details.

Above is the list of information sources.


the model from AER


DB pr.165 with 100mm B-24BM Naval Gun

DB pr.165 with 100mm B-24BM Naval Gun

DB pr.165 with 100mm B-24BM Naval Gun


Mittwoch, 8. Juni 2022

21/52 Sturmboottransporter der Kriegsmarine in 1/144

Sturmboottransporter in 1/144

Mal wieder ein Schiff! Nachdem ich in den letzten Wochen ja sehr viele Projekte im Bereich Schmalspur und Eisenbahn verwirklicht hatte, wollte ich was Neues zeichnen. Angefangen hatte ich mit einem U-Boot, das war innerhalb von ein paar Stunden auch schon fast fertig. Nur das Endstück trieb mich in den Wahnsinn weil ich die Form nicht hinbekam. Irgendwie geht es nicht. Vor lauter Frust ging ich meine Liste der noch zu zeichnenden Modelle durch, beim Sturmboottransporter blieb ich hängen. Das geschlossene Sturmboot hatte ich ja schon und der Sturmboottransporter wurde insgesamt 3 oder 4 mal gebaut. Es gibt zwar nicht so viele Fotos von Original, aber! es gibt einen Film. Der Originalfilm über das Siebelkommando und dessen Entwicklungen, zeigt auch den Sturmboottransporter. Zusammen mit einigen Skizzen und Illustrationen im Forum Marinearchiv, habe ich angefangen das Modell zu zeichnen. Aktuell bin ich zwar nicht nicht ganz fertig, aber es sollte schon erkennbar sein, wie in etwa das Modell später aussehen wird. Die Zeichnungen findet man, zusammen mit weiteren technischen Details hier.

Hier der Film in voller Länge, bei Youtube gibt es leider nur eine Zusammenfassung






Aktuell konstruiere ich die Rutschen für die Sturmboote,
Currently I am constructing the slides for the assault boats



das Heck mit den Sturmbooten,
the tail with the assault boats




Die Bugform ist noch nicht final, da fehlt noch einiges,
the front is still work in progress













Assault boat transporter in 1/144

Again a ship! After I had realized many projects in the area of narrow gauge and railroads in the last weeks, I wanted to draw something new. I started with a submarine, which was almost finished within a few hours. Only the end piece drove me crazy because I couldn't get the shape right. Somehow it does not work. Frustrated, I went through my list of models to draw and got stuck on the assault boat transporter. I already had the closed assault boat and the assault boat transporter was built 3 or 4 times. There are not so many photos of original, but! there is a film. The original film about the Siebel Command and its developments, also shows the assault boat transporter. Together with some sketches and illustrations in the Forum Marinearchiv, I started to draw the model. Currently I am not completely finished, but it should already be recognizable, how the model will look like later. The drawings can be found here, together with further technical details.

Above is the link to the complete movie, on youtube you can see only a summary





Dienstag, 1. März 2022

07/52 1/144 Mini U-Boot Delphin

unbekanntes Mini U-Boot Delphin

Zum Ende des Krieges wurde das Mini U-Boot Delphin entwickelt. Wie so oft, wurde auch mit diesem zu spät begonnen. Bis zum Kriegsende wurden noch 3 Prototypen gebaut und auch erprobt. Somit kommt es für mich auch in Frage, da ich ja keine Phantasie-Produkte zeichnen möchte.

Das U-Boot sollte entweder ein Torpedo unter dem Rumpf, oder eine Ankermine im Schlepptau mit sich führen. Ich habe mich für den Torpedo entschieden.

Parallel dazu ist mir dann der Gedanke gekommen, das ganze auch mit einem Anhänger darzustellen. Also habe ich, auf Basis der Modellbeschreibung auf der Homepage des Wettinger Modellbauforums, mich  daran gemacht und habe auch einen passenden Anhänger gezeichnet. 


Quellen:

https://ipmsdeutschland.de/archiv/FirstLook/MikroMir/MM_Delphin-1/MM_Delphin_I.html

http://www.modellmarine.de/index.php?option=com_content&view=article&id=3253:mikromir-deutsches-kleinst-u-boot-delphin-i-135&catid=416:mikromir

https://www.wettringer-modellbauforum.de/forum/index.php?page=Thread&threadID=54503

https://de.wikipedia.org/wiki/Delphin_(U-Boot)



1/144 Delphin auf Anhänger,
1/144 Delphin with trailer




U-Boot und Anhänger können auch seperat benutzt werden,
trailer and submarine are two seperate parts
                                     

vorn gibt es eine kleine Werkzeugbox,
in the front there is a small tool box

                                         


Mini U-Boot Delphin in 1/144

                                      

Delphin U-Boot

Delphin U-Boot mit Anhänger



unknown Mini Submarine Delphin

At the end of the war the mini submarine Delphin was developed. As so often, this one was started too late. Until the end of the war 3 prototypes were built and tested. Thus it comes for me also in question, since I would like to draw no fantasy products.

The submarine should carry either a torpedo under the hull, or an anchor mine in tow. I decided on the torpedo.

At the same time, I had the idea to represent the whole thing with a trailer. So, based on the model description on the homepage of the Wettinger Modellbauforum, I started to work on it and also drew a suitable trailer. 

Sources for more information:

https://ipmsdeutschland.de/archiv/FirstLook/MikroMir/MM_Delphin-1/MM_Delphin_I.html

http://www.modellmarine.de/index.php?option=com_content&view=article&id=3253:mikromir-deutsches-kleinst-u-boot-delphin-i-135&catid=416:mikromir

https://www.wettringer-modellbauforum.de/forum/index.php?page=Thread&threadID=54503

https://de.wikipedia.org/wiki/Delphin_(U-Boot)













Freitag, 25. Februar 2022

06/52 Pionierlandungsboot 43 Teil I

Deutsches Pionierlandungsboot 43 in 1/144

Ich bin mal wieder in den Bereich der deutschen Landungsschiffe eingetaucht und habe mir ein weiteres oder besser gesagt, gleich 2 deutsche Landungsschiffe gezeichnet. Allerdings werde ich heute erst eines vorstellen, das andere ist beim Druck durchgefallen und ich muss wohl noch einige Anpassungen machen, so dass es auch sicher gedruckt werden kann. 

Zunächst hatte ich angefangen den Marineartillerieleichter Typ II (MAL II) zu zeichnen. Während des Quellenstudiums habe ich dann festgestellt, dass dieses Design Ausgangspunkt für die Entwicklung de Pionierlandungsbootes 43 war. Der Name sagte mir nicht soviel, weshalb ich in einigen Büchern suchen musste. Im Internet findet man auch nicht wirklich viel zu dem Schiff / Boot. Das Schiff wurde wie viele Landungsboote am Bodensee von der Bodan Werft entworfen und gebaut. Vorgabe war möglichst viele Teile des Marineartillerieleichters Typ II zu verwenden.

Bis zum Ende des Krieges schaffte es die Bodan Werft einige Exemplare fertig zu stellen und diese an die Kriegsmarine bzw. an die Landungstruppen (der Wehrmacht) zu übergeben. Alle Schiffe wurden in der Ostsee eingesetzt und bei Kriegsende selbst versenkt. Wie so oft, ist die Zahl der erhalten gebliebenen Bilder sehr übersichtlich, aber es reichte doch, um das Modell ziemlich exakt umzusetzen. Leider kann ich aber noch immer keine Geländer anbieten, diese brechen beim Reinigen des Modells und dann sieht es nicht mehr schön aus. 

Wie üblich befinden sich alle Zurüstteile im Innern des Schiffes. Neben den Anbauteilen ist auch ein Sturmboot enthalten, da das Pionierlandungsboote am Heck über eine so genannte Sturmboot-Rutsche verfügte.


Seitenansicht des Entwurfs,
side view of the design, ready to print


Draufsicht, so wie das Modell gebaut aussehen soll,
top view, as it would be in the finished status


hier sieht man das Schiff noch mit Geländer, die fallen später weg,
here the ship with hand rails, which I had to delete later


Bei der Bewaffnung bin ich etwas vom Original abgewichen. statt der 8.8 Flak habe ich die 10.5 cm SK C32 gezeichnet, die gefällt mir besser. Jedoch bin ich mir nicht sicher, ob die Landungsboote überhaupt die Waffen bekommen hatten, Geschütze waren zum Kriegsende hin Mangelware und alle Fotos zeigen die Schiffe nur als Fähre.


Und hier nur die ersten Fotos auf die Schnelle gemacht, ich werde erst in den nächsten Tagen dazu kommen, mit der Bemalung beginnen zu können.

Die Rampe war zwei geteilt und aussermittig,
the ramp was made with two pieces and slightly out of the middle

                           

die Sturmboot Rutsche am Heck,
the ramp for a stormboat at the backsid of the ship


Draufsicht mit einigen LKWs als Ladung,
top view with some trucks for loading


der Aufbau noch ohne hintere MGS,
the structure without the MGs
 


hier kommt noch ein MG auf die Plattform,
the platform gets a heavy MG




German Pioneer Landing Ship 43 in 1/144

I have once again delved into the realm of German landing crafts and have drawn myself another, or rather, 2 German landing craft at once. However, I will only present one today, the other one fell through at printing and I guess I have to make some adjustments so that it can be printed safely. 

First I had started to draw the Marineartillerieleichter Typ II (MAL II). While studying the sources I found out, that this design was the starting point for the development of the Pionierlandungsboot 43. The name didn't mean that much to me, so I had to search in some books. On the internet you can't really find much about the ship / boat either. The ship was designed and built like many landing craft at Lake Constance by the Bodan shipyard. The specification was to use as many parts of the naval artillery lighter type II as possible.

By the end of the war, the Bodan shipyard managed to complete several examples and hand them over to the Kriegsmarine or to the landing forces (of the Wehrmacht). All the ships were used in the Baltic Sea and were themselves sunk at the end of the war. As is often the case, the number of surviving pictures is very limited, but it was enough to make the model fairly accurate. Unfortunately, however, I still can not offer railings, they break when cleaning the model and then it no longer looks nice. 

As usual, all of the add-on parts are inside the ship. In addition to the attachments, a storm boat is also included, as the pioneer landing craft had a so-called storm boat chute at the stern.





Mittwoch, 23. Februar 2022

05/52 Schlitten II als Komplett Set in 1/144

Schlitten II als komplettes Set in 1/144


Das kleine Schnellboot Schlitten II hatte ich bereits letztes Jahr hier im Blog vorgestellt.  Jetzt kommt der nächste Schritt, das Schnellboot als Transport-Set, also ein Henschel D33 als Zugfahrzeug, der Schlitten II und der Anhänger, der als Slipanhänger diente, so dass das Schnellboot direkt vom Anhänger aus ins Wasser gelassen werden konnte.

Den Schlitten II gab es nur einmal als Prototyp, vom Anhänger habe ich auch nur ein Foto gefunden, deshalb sind halt einige Details reine Spekulation. Dennoch habe ich das Modell so konstruiert, dass der Anhänger auch das Entladen darstellen kann, jedoch beim Trennen aufpassen, dass man nicht aus Versehen die falschen Teile abschneidet.

Für den Shop habe ich den Anhänger noch etwas verstärkt, so dass er etwas stabiler ist.


Quellen:

https://www.scalemates.com/de/kits/schatton-modellbau-72152-anhaenger-slipwagen-delphin-linse-schlitten-i-schlitten-ii--1275870#


https://www.modellversium.de/galerie/5-schiffe-ww2/15697-kleinstschnellboot-typ-schlitten-ii-schatton.html


https://de.wikipedia.org/wiki/Schlitten_(Schnellboot)


http://s-boot.net/versuchsboote%20km.html


alle Bestandteile des Sets,
all parts of the set


Slipvorgang des Schlitten II,
slipping into the water


Schlitten II in Transportposition,
Schlitten II ready for transportation


Schlitten II in 1/144


Slip-Vorgang,
ongoing slipping

das komplette Set,
the complete set


Schlitten II im Wasser,
Schlitten II in his element, the water



in 1/144: Schlitten II Komplettset 

in 1/72: Schlitten II Komplettset

in 1/87: Schlitten II Komplettset

in 1/100: Schlitten II Komplettset

in 1/160: Schlitten II Komplettset



Schlitten II as a complete set in 1/144

I already presented the small speedboat Schlitten II last year here in the blog.  Now comes the next step, the speedboat as a transport set, i.e. a Henschel D33 as towing vehicle, the Schlitten II and the trailer, which served as slip trailer, so that the speedboat could be launched directly from the trailer into the water.


The Schlitten II existed only once as a prototype, of the trailer I have found only one photo, so some details are pure speculation. Nevertheless, I constructed the model in such a way that the trailer can also represent the unloading, but when separating, be careful not to accidentally cut off the wrong parts.


For the store I reinforced the trailer a little bit, so that it is a bit more stable.


Samstag, 21. August 2021

29/52 Ein Schlitten der Baden ging

Ein Schlitten der Baden ging

Mit dem Begriff Schlitten verbinden die meisten Menschen wohl eher ein Sportgerät für Kinder bzw. für den Wintersport. Aber unter dem Begriff Schlitten II gab es auch eine Entwicklung der deutschen K-Verbände zum Ende des Krieges. Schlitten II war ein kleines Schnellboot, welches mit 2 Torpedos bewaffnet war.  Mehr über die Geschichte des Schlittens kann man hier nachlesen: Wikipedia.

Ïm Internet findet man einen Spanntenriss und verschiedene Fotos vom Orignial. Auch wenn es keine Kampfeinsätze gab, so hat es der Prototyp zumindest über das Reissbrett hinaus geschafft. Also habe ich mich entschlossen das Modell zu zeichnen, auch wenn es ja nicht wirklich zu mir passt. Lauter Rundungen, Kreise und Übergänge, machten die Konstruktion nicht ganz einfach. Da der Bootskröper aber symetrisch ist, war dann die Konstruktion doch nicht so schwer. Da ich kein entsprechendes Programm habe, musste ich das Modell von Hand aushöhlen und dünner machen. Die beiden Torpedos habe ich auch neu gezeichnet, die alten Designs wollte ich nicht nutzen. 

Das Original hat vorne eine gebogene Plexiglashaube. Zuerst wollte ich diese seperat zeichnen, jedoch hätte dies zu vielen neuen Problemen geführt, da ich ja mindestens 0.7 mm Wandstärke zum Drucken brauche. Also ist sie jetzt am Modell dran. Man muss diese entweder entsprechend anmalen oder nachher abfeilen und sich ein entsprechendes Stück Folie zurecht schneiden.

Leider kann ich aktuell nur das 3 D Modell zeichnen, Shapeways hat gerade ein kleines Problem.

Ich habe noch eine weitere Neuheit gezeichnet, die ist so gross, dass Shapeways nur 3 Drucker hat, auf denen das Modell gedruckt werden kann. Also warten über 10 neue Modelle darauf, dass dieses Modell endlich fertig wird. Ich hoffe Ende August / Anfang September kann ich dann alle Neuheiten endlich vorstellen.

Hier aber jetzt erst einmal der neue Schlitten II:


der Schlitten II mit seiner Bewaffnung,
Schlitten II with armament 

Seitenansicht,
side view



Schlitten II mit den beiden Torpedos,
Schlitten II with both Topedos


A sled that went swimming

Most people probably associate the term sled with a piece of sports equipment for children or for winter sports. But under the term Schlitten II there was also a development of the German K-units at the end of the war. Schlitten II was a small speedboat armed with 2 torpedoes.  You can read more about the history of the Schlitten here: Wikipedia.


On the Internet you can find a crack of the sledge and several photos of the original. Even if there were no combat missions, the prototype at least made it beyond the drawing board. So I decided to draw the model, even though it doesn't really suit me. Loud curves, circles and transitions, made the construction not so easy. But since the boat hull is symmetrical, the construction was not so difficult. Since I don't have an appropriate program, I had to hollow out the model by hand and make it thinner. I also redrew the two torpedoes, I didn't want to use the old designs. 

The original has a curved plexiglas canopy in the front. At first I wanted to draw this separately, but this would have led to many new problems, because I need at least 0.7 mm wall thickness for printing. So now it is attached to the model. You either have to paint it accordingly or file it off afterwards and cut an appropriate piece of foil.

Unfortunately I can currently only draw the 3 D model, Shapeways is having a bit of a problem right now.

I have drawn another new model, it is so big that Shapeways only has 3 printers to print the model on. So there are over 10 new models waiting for this one to finally be finished. I hope at the end of August / beginning of September I can finally present all the new models.








Donnerstag, 5. August 2021

26/52 italienischer Fährprahm, Motozattera MZ-B

Die italienische Version des deutschen Marinefährprahms: Die Motozattera


Irgendwie hatte es mich diese Woche gereizt mal wieder etwas Neues zu zeichnen. Nachdem ich in den letzten Wochen viele alte Zeichnungen reparieren musste, Modelle in andere Masstäbe umgewandelt hatte, wollte ich mal wieder bei Null anfangen und etwas zeichnen, was mir viel Freude bereiten würde. Also fiel meine Wahl auf ein Landungsschiff. Da ich den Typ D des deutschen Marinefährprahms bereits hatte, dachte ich an die italienische Variante. Die Italiener träumten davon Malta zu besetzen, hatten aber keine bzw. nicht genügend und qualifizierte Landungsschiffe. deshalb bekamen sie die Pläne für die deutschen Fährprahme. So wie ich es verstanden habe, waren die Unterschiede eher klein, Motoren und insbesondere die Bewaffnung waren die grössten Unterschiede. Die Marinefährprahme wurden in Italien von lokalen Werften nach deutschen Zeichnungen und wurden Motorattera genannt. 

Die Zeichnung stand in knapp 2 Tagen, dann ging es an die Details und die Bewaffnung. Mit der Bewaffnung konnte ich nicht viele Informationen finden. Deshalb kommt mein Schiff mit der Cannone da "76/40". Diese Version einer leichten Flak wurde oft bei der italienischen Marine eingesetzt. Das MG am Heck stammt aus meinem Bestand. Für den Druck befinden sich alle Zurüstteile wie immer im Bauch des Schiffes, mit dabei sind Rettungsringe, 2 Rettungsflösse und 2 kleine Ruderboote und Leitern und Maste. Die Bemalung ist nicht ganz eindeutig, Farbe war auch in Italien im 2. WK Mangelware, also einfach in grau lackieren.


Google Suche nach Fotos: Link

Background:

Die meisten Informationen habe ich aus dem historischen Marinearchiv.

Bewaffnung:

Die Beschreibung der Bewaffnung war noch etwas schwierig. Die italienischen Waffen sind nicht so bekannt und man muss etwas suchen, um gute Informationen dazu zu finden. Daher mal was ich hierzu gefunden habe:

https://www.wikiwand.com/it/Scotti-Isotta-Fraschini_20/70

https://www.wikiwand.com/it/MZ_737


Ebenso recht hilfreich für mich war ein schön beschriebener Baubericht einer Motozattera im Masstab 1/72. Baubericht in 1/72: Link


fertig zum Druck, wie immer, alles zubehör im Rumpf,
ready for printing, all addons inside the ship


Seitenansicht des Motozattera / Marinefährprahm,
side view of the Italian Motozattera /Marinefährprahm


Rückansicht mit der Toilette, kein Scherz,
back view with the restroom in the Italian version, no kidding


Die Landeklappe mit entsprechender Struktur,
landing ramp with the correct structure


Motozattera Typ MZ-B mit voller Bewaffnung,
Motozattera type MZ-B with complete details and all weapons


Italian version of the German Marinefährprahm: Motozattera MZ-B


Somehow it had irritated me this week times again to draw something new. After I had to repair many old drawings in the last weeks, had converted models into other scales, I wanted to start again from scratch and draw something that would give me a lot of pleasure. So my choice fell on a landing ship. Since I already had the Type D of the German naval ferry barge, I thought of the Italian version. The Italians dreamed of occupying Malta, but had no or not enough and qualified landing ships. so they got the plans for the German Fährprahme. As I understood it, the differences were rather small, engines and especially armament were the biggest differences. The naval ferry prams were built in Italy by local shipyards according to German drawings and were called Motorattera. 

The drawing was done in less than 2 days, then it was time to work on the details and the armament. With the armament I could not find much information. Therefore my ship comes with the Cannone da "76/40". This version of a light anti-aircraft gun was often used by the Italian Navy. The MG at the stern is from my stock. For the print all the kit parts are in the belly of the ship as usual, included are life rings, 2 life rafts and 2 small row boats and ladders and masts. The painting is not very clear, color was also scarce in Italy in WW2, so just paint in gray.


Google search for photos: Link

Background:

I got most of the information from the historical naval archives.

Armament:
The description of the armament was still a bit difficult. The Italian weapons are not so well known and you have to search a bit to find good information about them. Here is what I found:



Also quite helpful for me was a nicely described build report of a Motozattera in 1/72 scale. Build report in 1/72: Link







Sonntag, 28. Juni 2020

Herbert Ferry, first landing ferry for operation sealion Herbert Fähre für Operation Seelöwe 24/52

1/144 Herbert Fähre


Die Herbert Fähre war die erste Landungsfähre in einer langen Reihe von Landungsbooten. Das Herbert Material kam via dem österreichischen Heer zur Wehrmacht. Ursprünglich war es im ersten Weltkrieg als Brückengerät entwickelt worden. Die Wehrmacht baute daraus Fähren, die bei der Operation Seelöwe eingesetzt werden sollten. Die Probefahrten auf dem offenen Meer waren aber wohl nicht besonders überzeugend. Angetrieben worden die Herbert Fähren von Flugzeugmotoren. Zwei davon waren in offenen Gondeln auf der Plattform aufgebaut. Zum Steuern ware weitere 3 Motoren mit verlängerten Wellen am Heck installiert. Neben der schlechten Wassergängigkeit war auch der hohe Verbrauch am besonders wertvollen Flugzeug-Kerosin negativ. Dies alles führte schon wenig später zur Entwicklung der wesentlich besseren Siebelfähren.


front view of the Herbert ferry // Vorderansicht der Herbert Fähre

side view with the gondolas for the airplane engines // Ansicht mit den kleinen Plattformen für die Flugzeugmotoren

Zusammenbau / Assembly 

Das Set kommt als ein Teil, es muss nichts zusammengebaut werden. The Herbert ferry comes in one part, so no assembly is needed.

the extended shafts and the construction for the 3 middle engines / Motoren mit Steuerung und verlängerten Wellen

Herbert Fähre mit Phänomen Krankenwagen / Herbert ferry with 2 Phänomen ambulances

Herbert ferry; not a Siebel ferry

The development of the German landing crafts started in WWII with the so called Herbert bridging material. The material was original used to build bridges and was designed during WWI. The Austrian Army had taken it from the Cezch Army, so finally it landed in the arsenals from the Wehrmacht. There they used it to build ferries and had the idea to use them for the planed landing in Great Britain. Motorized with two former fighter engines built up in open platforms. Additional three engines were used to control the ferry. So all engines got extended shafts. But the Herbert ferries do not convinced the Kriegsmarine. The reports said, that they were lame ducks and not really useable for a landing operation.

1/144 Tiger advance // Tiger auf dem Vormarsch

Kleines Diorama in 1/144 für das Präsentieren von neuen Modellen Das Diorama eintstand in den letzten Tagen aus einer Laune heraus. Da ich g...