Posts mit dem Label Germany werden angezeigt. Alle Posts anzeigen
Posts mit dem Label Germany werden angezeigt. Alle Posts anzeigen

Sonntag, 23. November 2025

38/ 52 Kriegsstrassenbahnwagen

 1/144 Kriegsstrassenbahn als 3D Modell

Eigentlich sollte es nur irgendwas ähnliches wie eine Strassenbahn werden, um eine Strassenblockade mit der Strassenbahn darstellen zu können. Auf der Suche nach einem möglichst realistischen Vorbild, habe ich dann aber gelernt, selbst die Strassenbahnen waren im 2.WK vereinheitlicht. Also sollten, denn, so richtig gross in Fahrt kam die Produktion dann nicht mehr. Die Rohstoffe und die Fertigungskapazitäten wurden halt für die Rüstungsindustrie benötigt. Das Ziel des vereinheitlichten Designs, war wertvolle Rohstoffe zu sparen und mit möglichst wenig Material auszukommen. So waren auch die Sitzplätze weniger als in den Vorkriegsmodellen. Aber wie schon gesagt, wirklich viele Strassenbahnen wurden während des Krieges nciht mehr ausgeliefert, erst mit der Kapitulation wurden dann doch einige vereinheitlichte Modelle ausgeliefert. 


1/144 War tram as a 3D model

Actually, it was only supposed to be something similar to a tram, so that I could depict a roadblock with a tram. While searching for the most realistic model possible, I learned that even the trams were standardized during World War II. Or at least they were supposed to be, because production never really got off the ground. The raw materials and manufacturing capacities were needed for the arms industry. The aim of the standardized design was to save valuable raw materials and use as little material as possible. This meant that there were fewer seats than in the pre-war models. But as I said, not many trams were delivered during the war; it was only after the surrender that a few standardized models were delivered. 

http://shb-ev.com/ksw-749/

https://www.buntbahn.de/viewtopic.php?t=9792&start=14

https://www.trambahn.de/fg-beiwagen-i-1-56


geschlossener Beiwagen, Heidelberg,
closed sidecar, type Heidelberg



1/144 Kriegs-Strassenbahn mit Beiwagen,
1/144 wartime tram with sidecar


German wartime tram in 1/144,
Kriegsstrassenbahn in 1/144



1/144 Beiwagen,
1/144 sidecar





Dienstag, 27. Februar 2024

07/52 neue Schmalspursets und neues Diorama

1/144 Schmalspur Sets - Neuheiten und Gesamtübersicht


In den letzten Tagen habe ich meine neuen Sets für Schmalspur-Eisenbahnen fertig angemalt und auch alle nochmals geprüft. Alle Sets können jetzt via Shapeways bestellt werden. Gleichzeitig habe ich ein vor langer Zeit angefangenes Diorama wieder herausgeholt und endlich fertig gestellt. Somit kann ich jetzt auch die Modelle schön in Szene setzen. Das Diorama werde ich auf meiner Seite für Dioramen (Link einfügen) vorstellen und auch ein paar Fotos mit verschiedenen Modellen, zeigen. Ausserdem füge ich Fotos der angemalten Modelle auf der Shapeways Seite ein. Nachfolgend eine Liste aller meiner Schmalspur Modelle in 1/144. Wie immer, andere Masstäbe auf Wunsch, einfach schreiben.


1/144 narrow gauge sets - new items and overview

In the last few days I have finished painting my new sets for narrow gauge railroads and also checked them all again. All sets can now be ordered via Shapeways. At the same time, I took out a diorama I started a long time ago and finally finished it. This means I can now show off the models nicely. I will present the diorama on my page for dioramas (insert link) and also show a few photos with different models. I will also add photos of the painted models to the Shapeways page. Below is a list of all my narrow gauge models in 1/144. As always, other scales on request, just write.





























Deutz Schmalspur Lok,
Deutz narrow gauge locomotive



französische Lokomotive aus dem 1. WK,
French locomotive from WWI



neues Schmalspur Diorama in 1/144
new 1/144 narrow gauge diorama



Deutsche Zwillings Lok 
German twin locomotive

















Montag, 26. Februar 2024

06/52 850 Modelle und ein neuer Flaksuchscheinwerfer


850 Modelle und ein neues altes Modell

Seit heute habe ich 850 Modelle in meinem Shop. Bin selbst erstaunt, es werden immer mehr. Gleichzeitig ist die Pflege mittlerweile ein nicht zu unterschätzender Punkt. Letzte Woche bestellte ein Kunde ein ganz altes Modell, den 150 cm Suchscheinwerfer. Das Modell ist sehr alt, ganz vom Anfang. Wenn ich heute die Zeichnung sehe, laufe ich weg. Und dann passiert es! Plötzlich reklamiert Shapeways eine Stelle am Modell als zu dünn, sie könnten es nicht drucken. Diskutieren ist leider zwecklos, auch wenn das Modell schon 20 x problemlos gedruckt wurde. Also stand ich vor der Entscheidung, was ich machen soll. Letztlich habe ich mich entschlossen, das Modell komplett neu zu zeichnen. Dabei habe ich alte Fehler korrigiert, Details ergänzt und einige Punkte neu hinzugefügt. Dabei fiel mir auf, wie oft der Suchscheinwerfer geändert wurde. Die Radabdeckungen wurden geändert, der Scheinwerfer hatte (am Anfang?) rechts und links zwei dicke Rohre als Halterung, später wurden diese durch ein geschlossenes Profil geändert. Die Drehscheibe war mal gelocht, mal mit größeren Aussparungen. Jetzt ist das Modell wieder okay und ich warte auf das nächste Modell, welches überarbeitet werden muss.


850 models and a new old model

As of today I have 850 models in my store. I'm amazed at myself, there are more and more. At the same time, maintenance is now a point that should not be underestimated. Last week a customer ordered a very old model, the 150 cm searchlight. The model is very old, from the very beginning. When I see the drawing today, I run away. And then it happens! Suddenly Shapeways complains that a part of the model is too thin and they can't print it. Unfortunately, there's no point in arguing, even if the model has already been printed 20 times without any problems. So I was faced with the decision of what to do. In the end, I decided to completely redraw the model. I corrected old mistakes, added details and added some new points. I noticed how often the searchlight was changed. The wheel covers were changed, the headlight had (at the beginning?) two thick tubes on the right and left as a holder, later these were changed to a closed profile. The turntable was sometimes perforated, sometimes with larger recesses. Now the model is okay again and I'm waiting for the next model, which has to be reworked.


1/144 Suchscheinwerfer 150 cm,
1/144 AA search light

1/144 Suchscheinwerfer 150 cm,
1/144 AA search light




Freitag, 16. Februar 2024

06/52 neue Modelle zwei Exoten der dt. Wehrmacht in 1/144

Ankündigung neue Exoten in 1/144

Eigentlich bin ich kein Freund von den so genannten Papier-Panzern, also Entwicklungen, die es nie über das Reißbrett hinaus geschafft haben. Da wird oft wild kombiniert, nur um irgendwie was Neues zeigen zu können. Raketen auf Panzern sind z.B. so eine überflüssige Idee.

Aber das heißt nicht, dass es keine Modelle gibt, die doch schon eine gewisse Berechtigung haben. Heute möchte ich 2 solche Modelle vorstellen. Beide sind Panzertransporter. Das erste Modell ist ein Prototyp, dessen Existenz mit einigen Fotos belegt ist. Aber das Fahrzeug ging nie in Serie, wurde also nur ein oder vielleicht zweimal zur Erprobung gebaut. Bei dieser Kombination ist sehr viel unklar, teils weil es wenige Informationen gibt, teils weil die Fotos wichtige Details nicht zeigen. An dem Modell habe ich sehr viel Zeit verbrannt und immer wieder mit anderen Fahrzeugen aus der Zeit abgeglichen. Während die Zugmaschine noch recht schnell umzusetzen war, war der Anhänger eine einzige Katastrophe. Hier habe ich viele Annahmen treffen müssen. Zunächst bin ich davon ausgegangen, dass Panther und Tiger drauf passen müssen. Königstiger (Tiger II) und Jagdtiger würden mit etwas Überstand seitlich auch noch passen. Doch dann kam in einem Forum der Hinweis, nein, der Transporter war für Panzer IV gedacht. Also änderte sich die Breite wieder. Die beiden Drehgestelle vorn und hinten sind recht spekulativ. Auch konnte ich nicht herausfinden, wie die Panzer auf den Tieflader kommen. Wieder wie beim Panzertransportanhänger 116, indem man hinten abkoppelt, den Panzer auf die Ladefläche bekommt und dann alles anhebt und wieder anhängt? Warum die Wehrmacht es so kompliziert gemacht hat, weiss ich nicht, alle anderen Nationen haben bei ihren Panzertransportern immer mit einer Rampe hinten gearbeitet und den Panzer direkt per Seilwinde draufgezogen, Klappe hoch und weg.

Egal, alles Spekulation, wichtig ist, ich habe für den Anhänger auch eine Konstruktion gefunden und kann so wieder ein sehr seltenes Modell vorstellen. In diesem Fall, kann ich sogar sagen, ich bin der erste (Klein)-Hersteller, der dieses Modell auf den Markt bringt.

 

Der zweite deutsche Panzertransporter ist aber dafür aus Papier, sprich, er wurde nie gebaut. Dabei hätte er wohl auf dem Kühler einen tollen Schriftzug gehabt: Porsche. Die Rede ist vom Porsche 142 Entwurf. Dieser wurde von Porsche entworfen, im Zusammenhang mit der Entwicklung des neuen VK 3001 Panzer.. Porsche hatte hierzu auch Entwürfe eingereicht und sich auch schon Gedanken gemacht, wie das Thema Panzerbergung bzw. Panzertransport zu lösen sei. Die Konstruktion sah vor, dass der Panzer praktisch zwischen Vorder- und Hinterteil eingehängt werden würde, also wie in einer “Tüte” hängen würde. Da vieles noch nicht bis ins Ende konstruiert war, sind der Fantasie kaum Grenzen gesetzt. Das Modell kommt dann in den nächsten Wochen auch in 1/144.

Eine weitere kleine Ankündigung, ich werde wohl noch einen Panzertransporter am Start haben, aber das ist noch geheim! 

Hier noch ein Link, zu einer Facebook-Seite, auf der der Porsche Entwurf etwas ausführlicher beschrieben ist: Facebook


Announcement of new exotics

I'm actually not a fan of so-called paper tanks, i.e. developments that never made it past the drawing board. They are often wildly combined just to be able to show something new. Missiles on tanks, for example, are such a superfluous idea.

But that doesn't mean that there aren't models that have a certain justification. Today I would like to present 2 such models. Both are armored transporters. The first model is a prototype, the existence of which is documented by a few photos. But the vehicle never went into series production, so it was only built once or perhaps twice for testing. A lot is unclear about this combination, partly because there is little information, partly because the photos do not show important details. I spent a lot of time on the model and repeatedly compared it with other vehicles from the period. While the tractor unit was quite quick to build, the trailer was a complete disaster. I had to make a lot of assumptions here. At first I assumed that the Panther and Tiger would have to fit on it. Königstiger (Tiger II) and Jagdtiger would also fit with a little overhang to the side. But then I read in a forum that no, the transporter was intended for Panzer IV. So the width was changed again. The two bogies at the front and rear are quite speculative. I also couldn't find out how the tanks got onto the low loader. Again, as with the Panzertransportanhänger 116, by uncoupling the rear, getting the tank onto the loading area and then lifting everything up and attaching it again? I don't know why the Wehrmacht made it so complicated, all other nations always used a ramp at the back of their armored transporters and pulled the tank directly onto it with a winch, lift the flap and off you go.

Anyway, it's all speculation, the important thing is that I have also found a design for the trailer and can therefore present another very rare model. In this case, I can even say that I am the first (small) manufacturer to bring this model onto the market.

 

However, the second German armored transporter is made of paper, i.e. it was never built. It would probably have had great lettering on the radiator: Porsche. We are talking about the Porsche 142 design. This was designed by Porsche in connection with the development of the new VK 3001 tank. Porsche had also submitted designs for this and had already thought about how to solve the issue of tank recovery or tank transport. The design envisaged that the tank would be practically suspended between the front and rear sections, i.e. hanging in a "bag". As many things had not yet been designed to the end, there are hardly any limits to the imagination. The model will also be available in 1/144 in the next few weeks.

Another small announcement, I will probably have a tank transporter at the start, but that is still a secret! 

Here is a link to a Facebook page where the Porsche design is described in more detail: Facebook


Die ganze Recherche und Suche nach dem unbekannten Fahrzeug kann man in diesen beiden Foren lesen:

The complete story of this interesting research can be found in these two German forums:

Forum der Wehrmacht

Hansebubforum


Füchsle Panzer Berge und Transport Set,
Füchsle tank recovery and transport set


der Anhänger mit der besonderen Technik,
the trailer with the very special technical solution


das Original
, Quelle: Hansebubforum

der Anhänger separat,
only the trailer


Porsche Projekt 142 Panzerbergefahrzeug,
Porsche, project 142 tank recovery truck

Donnerstag, 1. Februar 2024

02/52 V2 Rakete auf Eisenbahn-Starteinheit

1/144 V2 auf Eisenbahn-Abschusseinheit

Das Modell als Zeichnung und gedrucktes Modell, habe ich ja schon vorgestellt. Jetzt bin ich auch endlich dazu gekommen, alles anzumalen und auch die letzten Schwachstellen und einen kleinen Fehler noch auszumerzen. Auch wenn die V2 im Bausatz nicht enthalten ist, fürs Foto sieht es mit Rakete viel besser aus. 

Also eine V2 dazu genommen, doch wenn, dann wollte ich schon die Mehrton-Tarnung verwenden. Das war eine schöne Herausforderung. Über die Rundungen der Rakete war es nicht einfach, die Farben so zu verteilen, dass es immer unterschiedliche Farben sind. Ganz 100 % ist es mir nicht gelungen, doch ich hoffe man sieht es nicht auf den Fotos.Das Modell steht in den nächsten Tagen im Shop und auch gleich in den Masstäben 1/100, 1/120, 1/87, 1/72 und 1/76. Weitere Modelle rund um das Thema V2 kommen dann im Laufe des Jahres.


1/144 V2 on Eisenbahn launching unit

I have already presented the model as a drawing and printed model. Now I've finally got around to painting everything and eliminating the last weak points and a small mistake. Even though the V2 is not included in the kit, it looks much better for the photo with the rocket. 

So I added a V2, but if I did, I wanted to use the multitone camouflage. That was a nice challenge. It wasn't easy to distribute the colors over the curves of the rocket so that they were always different colors. I didn't succeed 100%, but I hope you can't see it in the photos. The model will be in the store in the next few days and also in the scales 1/100, 1/120, 1/87, 1/72 and 1/76. Further models on the subject of the V2 will be coming in the course of the year.





V2 mit mobiler Startrampe in 1/144,
V2 with mobile launch unit



Rückseite des 1/144 Modells der V2 auf Startrampe,
back view of the 1/144 V2 rocket with mobile launch tower



1/144 V2 in Transport Stellung,
1/144 V2 in transport position


Diorama 1/144 V2 mit mobiler Startrampe
Das ist nicht wirklich ein Diorama. Aber ich wollte mal sehen, wie das Modell auf einem Diorama wirkt. Daher hatte ich für das Foto einfach ein paar Fahrzeuge, die bei V2 Einheiten verwendet wurden, auf ein Eisenbahn-Diorama gestellt und ein paar Fotos gemacht. Fast reicht es auch schon für ein richtiges Diorama, die Lokomotive habe ich, den grossen Tankwagen für den flüssigen Sauerstoff, den kleinen Tankwagen für den B-Stoff, die Henschel Feuerwehr für den Rungenwagen, mal sehen, ob ich bis zum Sommer einen ganzen Schiesszug zusammen bekomme.


Diorama 1/144 V2 with mobile launch pad
This is not really a diorama. But I wanted to see how the model looks on a diorama. So for the photo I simply placed a few vehicles used on V2 units on a railroad diorama and took a few photos. I almost have enough for a real diorama, I have the locomotive, the large tank car for the liquid oxygen, the small tank car for the B-stock, the Henschel fire engine for the stake car, let's see if I can get a whole shooting train together by the summer.



1/144 Diorama V2


1/144 Diorama V2

Samstag, 23. Dezember 2023

51/52 Weihnachtsgeschenke // some appetizer

1/144 Neuheiten für Januar 2024

Hier ein paar Ausblicke,was in den nächsten Wochen zum Verkauf frei gegeben wird. Wie so oft, hinke ich mit dem Anmalen hinter her, doch vielleicht werde ich jetzt schneller, ich habe bereits Weihnachtsferien. Ausserdem habe ich bereits wieder mit den nächsten Modellen angefangen, diesesmal aber wieder mehr im Bereich von LKWs, Anhängern und vielleicht fange ich auch mal mit einem Panzer an. Mal sehen, ich habe da so eine Idee, und das Modell gibt es in 1/100 noch nicht. Die Umwandlung in andere Massstäbe muss ich noch machen, wer nicht warten will, einfach reklamieren. 


1/144 New items for January 2024

Here are a few previews of what will be released for sale in the next few weeks. As so often, I am lagging behind with the painting, but maybe I will be faster now, I already have Christmas vacation. I've also already started on the next models, but this time I'm focusing more on trucks, trailers and maybe I'll even start on a tank. Let's see, I have an idea, and the model doesn't exist in 1/100 yet. I still have to convert it to other scales, so if you don't want to wait, just let me know.

die V2 mit dem Eisenbahn-Startwagen
the V2 with the railroad starter car

fertig zum Start, V2 in 1/144,
ready for launch, V2 in 1/144



B-Stoff Tankwagen für die V2 Züge,
B-Stoff tank wagon for the V2 trains

B-Stoff Tankwagen in 1/144,
B-Stoff tank wagon in 1/144

Henschel Baufahrzeuge,
Henschel construction vehicles

Henschel Räumer

Henschel Räumer in 1/144

Henschel Räumer Vorderansicht,
Henschel Räumer front view

Henschel Scraper

Henschel Scraper in 1/144

Henschel Scraper

sSla 44 Doppelset in 1/144,
sSla 44 double set in 1/144

sSla 44

sSla 44

V2 Starttisch, Set of 3,
V2 Start table, Set of 3

V2 Starttisch mit Anhänger,
V2 start table with trailer



set of 3

Locotracteur Crochat

Locotracteur Crochat


Locotracteur Crochat

1/144 Zwilling Lok aus dem 1. WK,
twin loco from WWI in 1/144

1/144 Zwilling Lok aus dem 1. WK,
twin loco from WWI in 1/144

1/144 Schmalspurset, Starter Set,
1/144 narrow gauge starter set

1/144 Schmalspurset, Starter Set,
1/144 narrow gauge starter set


Hf 7 Heeresfeldwagen in 1/144


1/144 German range finder for heavy artillery,
1/144 Entfernungsmesser für schwere Geschütze


1/144 German range finder for heavy artillery,
1/144 Entfernungsmesser für schwere Geschütze


Freitag, 1. Dezember 2023

48/52 neues Highlight V2 mobile Abschussrampe // V2 mobile plattform

Mobile Abschussrampe für die V2 auf Eisenbahn Schwerlastwagen SSLa 44

Die Idee stammt von einem Kollegen, der die Umsetzung vor einiger Zeit auf dem Forum Axishistory mal vorgestellt hatte. Leider wurde der Bericht aber nie bis zum fertigen Modell beschrieben.

Meine Neugier war aber geweckt. Es gibt einige Fotos, die zeigen eine V2 mit der Startrampe auf einem Eisenbahnwagen. Oft werden die Fotos in den falschen Zusammenhang gestellt. Also begab ich mich auf die Suche und fand nach und nach ein paar Informationen. Zunächst die wichtigste Erkenntnis, es wurden nur Versuche unternommen, wahrscheinlich in Peenemünde oder in der Nähe. Einen gefechtsmässigen Einsatz hat es nie gegeben. Wie viele Plattformwagen gebaut worden sind, ist für mich nicht ganz klar. Auf einer Seite ist von 15 Wagen die Rede, in dem Buch «V2 – gefrorene Blitze» sprechen sie von 3 Wagen. Die Wagen wurden von der Reichsbahn übernommen, der Aufbau stammt wohl von Meiler, die bauen noch heute Hebevorrichtungen für Kipper und Silofahrzeuge. Die Zusammensetzung der Züge ist auch nicht ganz sicher, wahrscheinlich ist dies der Tatsache geschuldet, dass man hier noch am Testen war.

Zurück zum eigentlichen Plattformwagen. Neben einigen Fotos die ich im deutschen Nationalarchiv online finden konnte, habe ich auch einen Papierbausatz der polnischen Firma GPM gefunden. Damit hatte ich die wesentlichen Bestandteile für das Modell zusammen.  Beim Zeichnen gab es dann schon noch genügend Probleme, ich musste Mindest-Druckstärken, optisches Erscheinungsbild und das Vorbild ja irgendwie unter einen Hut bringen. Ausserdem wollte ich die wesentlichen Teile beweglich darstellen oder zumindest verschiedene Zustände darstellen können. Damit der Preis des Modelles nicht durch die Decke geht, habe ich die V2 nicht auch mit dazu genommen. Diese kann man auch von Takara nehmen oder die von mir bereits umgesetzte Version. Das Modell besteht im Wesentlichen aus den folgenden Baugruppen:

  • Starttisch
  • Hebevorrichtung
  • Plattform
  • Ablenkbleche
  • Arbeitsbühnen

Das Modell ist fertig gezeichnet und wird in den nächsten Wochen gedruckt. Ich hoffe kurz vor Jahresende kann ich auch das Modell dann im Original zeigen. Den ersten Schiesszug werde ich dann in meinen Weihnachtsferien bauen.

In der nächsten Woche werde ich dann vorstellen, wie ein Schiesszug ausgesehen hat, es gibt auch einige Fotos hierzu.

 

mobile launching ramp for the V2 on SSLa44

The idea came from a colleague who had presented the realization some time ago on the Axishistory forum. Unfortunately, the report was never described up to the finished model.

But my curiosity was aroused. There are some photos that show a V2 with the launch pad on a railroad car. But the photos are often placed in the wrong context. So I went looking and gradually found some information. First of all, the most important finding was that only tests were carried out, probably in Peenemünde or nearby. There was never any combat use. It is not entirely clear to me how many platform wagons were built. One page mentions 15 wagons, in the book "V2 - gefrorene Blitze" they talk about 3 wagons. The wagons were taken over by the Reichsbahn, the superstructure probably came from Meiler, who still build lifting devices for tippers and silo vehicles today. The composition of the trains is also not entirely certain, probably due to the fact that they were still being tested.

Back to the actual platform car. In addition to some photos that I was able to find online in the German National Archive, I also found a paper kit from the Polish company GPM. This gave me the essential components for the model.  There were still enough problems with the drawing, I had to somehow reconcile minimum print thicknesses, visual appearance and the prototype. I also wanted to be able to move the main parts or at least represent different states. To prevent the price of the model from going through the roof, I didn't include the V2. This can also be taken from Takara or the version I have already realized. The model essentially consists of the following components:

  • Launch table
  • lifting device
  • platform
  • deflector plates
  • working platforms

The model has been drawn and will be printed in the next few weeks. I hope to be able to show the original model shortly before the end of the year. I will then build the first shooting train during my Christmas vacation.

In the next week I will present how a shooting train looked like, there are also some photos.

V2 mobile launch system,
V2 mobile Startrampe

V2 mobile launch system,
V2 mobile Startrampe






 https://commons.wikimedia.org/wiki/File:Bundesarchiv_RH8II_Bild-B1935-44,_Peenem%C3%BCnde,_Abschussrampe_auf_Eisenbahnwagen.jpg

https://commons.wikimedia.org/wiki/Category:Historical_photographs_of_V-2_missiles


1/144 Tiger advance // Tiger auf dem Vormarsch

Kleines Diorama in 1/144 für das Präsentieren von neuen Modellen Das Diorama eintstand in den letzten Tagen aus einer Laune heraus. Da ich g...