Samstag, 9. Oktober 2021

34/52 V2 T-Stoff Vorwärmer in 1/144

T-Stoff Vorwärmer


Heute stelle ich einen weiteren kleinen Mosaikstein vor, für mein neustes "Grossprojekt" Wer meinem Blog folgt, wird merken, es muss wohl was zu tun haben mit der V2. Zum Teil durch meinen Freund Udo, aber auch durch einen Besuch in meiner alten Heimat bin ich auf die Idee gekommen. Heute gibt es ein kleines Set mit zwei Vorwärmer für den Treibstoff der V2. Der Sauerstoff wurde ja gefroren transportiert und als Gas dann zum Betanken verwendet. In dem Zusammenhang kommt dann der kleine Vorwärmer zum Einsatz. Zum Start der Rakete braucht es den Anhänger dann nicht mehr. Aber da ich möglichst viele der Fahrzeuge rund um die V2 bauen will, brauche ich auch die beiden Vorwärmer.

Mehr zu dem Thema V2 wird es wohl kurz vor Weihnachten geben, ich bin noch am wichtigsten Teil meines Sets dran. So viel sei schon mal verraten, es hat kein Hersteller im Programm, die Spurbreite beträgt 1435 mm. Viel Spass beim Raten.


1/144 Vorwarmer


Bilder zum Vorbild finden sich hier: Lead warrior, und wer das Modell noch etwas suppern will, sollte mal hier schauen: schauen.






1/144 Vorwärmer für V2 Rakete,
1/144 Preheater trailer for V2 rocket


fertig zum Betanken des Aggregats A4, bzw. V2
ready to fill the A4 V2 rocket


klein und fein,
small and tiny



1/144 German V2 Rocket Hydrogen Peroxide Preheater Trailer

Today I present another small mosaic stone, for my latest "major project" Who follows my blog, will notice, it must have something to do with the V2 rocket. Partly through my friend Udo, but also through a visit to my old home, I came up with the idea. Today there is a small set with two preheaters for the fuel of the V2. The oxygen was transported frozen and used as gas for refueling. In this context the small preheater is used. For launching the rocket, the trailer is then no longer needed. But since I want to build as many of the vehicles around the V2 as possible, I also need the two preheaters.

More about the V2 will be published shortly before Christmas, I'm still working on the most important part of my set. So much is already betrayed, it has no manufacturer in the program, the track width is 1435 mm. Have fun guessing.




Pictures of the prototype can be found here:  Lead warrior, and if you want to super the model a bit more, you should have a look here: look here



Keine Kommentare:

Kommentar veröffentlichen

Please fell free to leave a comment

14/52 Obice da 305/17 WWI gun

Obice da 305/17, Mörser aus dem 1. Weltkrieg in 1/144 Ich weiss auch nicht so recht, wie es gekommen ist, ich sollte andere Modelle zeichnen...